Firestone 7.50R20 Truck/Bus/Low Platform Trailer Radial inner tube with TR441 valve by Bridgestone Firestone at Daily News Miami. MPN: 553020. Hurry! Limited time offer. Offer valid only while supplies last. SAFETY WARNING: DISREGARDING THESE MOUNTING INSTRUCTIONS MAY RESULT IN EXPLOSION CAUSING SERIOUS INJURY, OR DEATH. ONLY SPECIALLY TRAINED PERSONS
Product Description & Reviews
SAFETY WARNING: DISREGARDING THESE MOUNTING INSTRUCTIONS MAY RESULT IN EXPLOSION CAUSING SERIOUS INJURY, OR DEATH. ONLY SPECIALLY TRAINED PERSONS USING PROPER EQUIPMENT SHOULD SERVICE TIRES AND TUBES. 1. Insert the tube in the tire, making sure any valve offset is in the same direction as the offset of the valve hole in the rim. Partially inflate to ROUND OUT tube. 2. Lubricate the base of the tube and the insides and bases of the tire beads with suitable mounting lubricant (Never use anti-freeze, silicones or petroleum-based lubricants). When a flap is required, lubricate the rim side of the flap as well as the surface that will contact the tire. 3. Mount tire onto rim, completely install rings, and check for proper seating of components. 4. BEFORE FURTHER INFLATION, THE ENTIRE RIM/TIRE ASSEMBLY MUST BE PLACED IN A SAFETY CAGE, OR OTHER EQUIVALENT RESTRAINING DEVICE. ALWAYS STAND CLEAR OF ASSEMBLY WHILE INFLATING AND USE A REMOTE CONTROL INFLATION HOSE WITH AN IN-LINE GAGE AND CLIP-ON CHUCK. 5. NEVER EXCEED 40 PSI (35 PSI ON AGRICULTURAL TIRES) TO SEAT BEADS. IF THE BEADS DO NOT FULLY SEAT, DEFLATE THE ASSEMBLY, DEMOUNT THE TIRE, RELUBRICATE, AND REPEAT THE PROCESS. 6. After beads are fully seated, DEFLATE COMPLETELY to remove any buckles in the tube. Then reinflate to recommended operating pressure and thoroughly inspect for full and proper assembly BEFORE removing from the restraining device. 7. Tubes are only one component of a tire/rim assembly, and you should ALSO be familiar with the general mounting safety precautions recommended by the Rubber Manufacturers' Association (RMA), the rim manufacturer and the mounting equipment manufacturer. BE SURE TO UTILIZE THE PROCEDURES, TOOLS AND PRECAUTIONS REQUIRED BY THE OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) AND RECOMMENDED BY THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA).
Features & Highlights
- TRUSTED BRAND: Firestone inner tube for ATV Radial; made for Firestone
- STEM TYPE: TR441 valve stem for Light truck, truck-bus, mining sizes. Valve is supplied bent and should only be used in SLOTTED RIMS. Bent length is approx 3.7 inches with a maximum inflation is 150 psi. Not intended for use with liquid ballast.
- SPECIAL FEATURES: the TR441 valve will come bent and should ONLY be used in slotted type wheels or rims
- VERSATILE SIZING: See description for full list of sizes that this tube can be used for
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Bridgestone Firestone, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By ROAD WARRIOR
mpn: RW366, ean: 0791102495329,
(2 - TIRES) ROAD WARRIOR ALL POSITION PATTERN 366 NEW TIRES 16 PLY FOR TRACTOR, TRAILER, BUSS OR TRUCKS FRONT OR REAR 11R22.5 HEAVY DUTY PREMIUM QUALITY, DOT APROVED, MADE WITH GERMAN TECHNOLOGY AND FIRST GRADE RAW MATERIALS FROM MALAYSIA WITH AMERIC...
A premium regional drive tire designed with four season traction in mind. This tire is ideal for severe wet, mud, snow and ice conditions because of the enhanced sniped tread pattern.Pinned for studs. For traction during wet or dry maneuvers. Reinfor...
By BRAND NEW
mpn: MOBILE HOME, ean: 0739027182122,
8-14.5 wheel and tire assembliesTire Size: 8-14.5 Load Range: G. Tire Weight Rating: 3100 Lbs. Max. Pressure: 115 PSI. Bolt Configuration: Open Center - See diagram for fitment. Pre Mounted Bias Ply Tire On Steel Wheel. Center Bore: Open Center. ...